Gang Sheet Builder

WHY GANG SHEETS SAVE YOU MONEY

MAXIMIZE EFFICIENCY
Pay only for sheet length, not per design. Fit 15-300+ designs on one affordable sheet.

REAL SAVINGS EXAMPLE
20 small logos individually elsewhere: ~$50
Same 20 logos on one 2ft sheet: $12
You save: $38 (76% savings)

PERFECT FOR TESTING
Launch new products without inventory risk. Order one sheet with 30 test designs, press on-demand as orders come in.

FAST & SIMPLE
- One upload vs. 40 separate orders
- Smart auto-arrangement maximizes space
- Mix any design sizes on one sheet
- Zero weeding—just cut and press

NO DESIGN SOFTWARE NEEDED
Upload your artwork and our builder handles the rest.

We're confident in our gang sheets, so we back every order with a simple promise:

If any issue arises with your gang sheet, we'll make it right — fast and free.

What's Covered:
✓ Print quality issues (color, resolution, defects)
✓ Adhesion problems (won't stick or peels)
✓ Material defects (film or powder issues)
✓ Arrangement errors (we placed designs incorrectly)
✓ Shipping damage

How It Works:
1. Contact us within 45 days of receiving your order
2. Send a photo showing the issue
3. We'll reprint your gang sheet or issue full refund - your choice

No forms. No hassle. No questions asked.

Contact Us:
Phone: (773) 234-2050
Email: infot@ezdtfmaker.com
Average response time: Within 24 hours ( Business Days)

We've printed 100,000+ gang sheets with a 99.8% satisfaction rate.

How to Press Gang Sheet Transfers
Same Process as Individual Transfers

STEP 1: Cut Your Designs

Use scissors or craft knife to cut between designs.
Leave about 1/8" space between each design (we add this automatically).

You don't need to cut perfectly - the carrier film peels away clean.

💡 Pro Tip: Only cut what you need. Store the rest of the sheet flat and it will last for years.

STEP 2: Position on Garment

- Place design exactly where you want it
- Smooth out any wrinkles in fabric
- For curved surfaces, use heat-resistant tape

STEP 3: Apply Heat

HEAT PRESS:
- Temperature: 310°F (155°C)
- Pressure: Medium-high
- Time: 15 seconds
- Use protective sheet (Teflon or silicone)

HOUSEHOLD IRON:
- Set to highest heat (cotton setting)
- Apply firm, even pressure
- Press for 15-20 seconds
- Keep iron moving slowly over entire design

💡 Pro Tip: Test one transfer first to dial in your settings

STEP 4: Peel the Film

Wait 3-5 seconds (hot peel) OR wait until cool (cold peel)
Both work perfectly.

If design lifts: Press again with more pressure or +15°F

STEP 5: Final Press (Important!)

- Cover design with parchment paper
- Press for 10-15 seconds
- This increases durability 2x and improves softness

CARE INSTRUCTIONS:
✓ Wait 24 hours before first wash
✓ Wash inside out in cold water
✓ Tumble dry low or hang dry
✓ Don't iron directly on design

STORING UNUSED GANG SHEETS:
- Keep flat (don't roll)
- Store in cool, dry place
- Avoid direct sunlight
- Lasts 2+ years when stored properly

Questions? Call (773) 234-2050

Gang Sheet File Requirements

WE ACCEPT ANY FILE FORMAT:
✓ PNG (preferred - transparent background)
✓ PDF
✓ AI (Adobe Illustrator)
✓ PSD (Photoshop)
✓ SVG / EPS

Upload all your files at once - no limit on number of designs.

QUALITY REQUIREMENTS:
- Minimum: 300 DPI at actual print size
- Recommended: 600 DPI for maximum detail
- Each design can be a different file format

GANG SHEET SPECIFIC TIPS:

✓ Name Your Files Clearly
Good: "logo_red_3x3.png", "vintage_design_8x10.png"
Bad: "IMG_0001.png", "design.png"

Helps you identify each design in the builder.

✓ Mix Different File Types
You can upload:
- 10 PNG files
- 5 JPG files
- 3 PDF files
All on the same gang sheet - no problem.

✓ Different Sizes OK
Upload designs intended for different final sizes:
- Some 3x3
- Some 5x5
- Some 12x16

The builder lets you set each design's size individually.

✓ We Clean Up Every File
- Color correction
- Background removal (if needed)
- Resolution optimization
- Size adjustments

All included free - normally costs $15-50 per design elsewhere.

COMMON QUESTIONS:

Q: Can I upload 50 designs at once?
A: Yes! No limit on number of files.

Q: What if my files are different qualities?
A: We'll optimize each one individually. If any are too low quality, we'll let you know which ones need replacement.

Q: Can I add more designs after uploading?
A: Yes, just click "Add More Designs" in the builder.

Q: Do I need to size them before uploading?
A: No, you set the size for each design in the builder.

Questions? Email files to info@ezdtfmaker.com for free review before ordering.